Do you know about low-cost products that can replace gyroscopes?

 In the mining logging industry, they have relatively high requirements for various measuring instruments and high accuracy requirements for well logging. So how can we achieve low-cost and more accurate well logging? I have a product here that can solve this problem. If you have any questions, relevant people can come and find out more about it and leave your valuable opinions. If you have better products, we can also communicate with each other. This is a link to our products, you can click to view it to learn the product knowledge you need.https://www.ericcointernational.com/drilling-and-logging-system/mwd-components

Dynamic Direction Sensor

ER-DOS-03 (0~180°±0.1°) Features:
1. High temperature resistant;
2. Resistance to vibration and shock;
3. Dynamic measurement under rotation;
4. Low power consumption.

In the field of petroleum logging, which component can provide more accurate, safe and high-quality measurements?

 ER-OS-05 Economical Directional Sensor includes a 3-axis flux-gate sensor and a 3-axis MEMS acceleration sensor. The sensor is equipped with built-in temperature compensation, and the inclination accuracy is ±0.1° and azimuth accuracy is ±0.5° within the temperature range of 0~125°c.

In addition, the sensor can also measure the total acceleration, total magnetic field strength, magnetic tool surface angle, geomagnetic inclination angle, temperature, rotation speed and other parameters. ER-OS-05 has the characteristics of small size, high precision, anti-vibration and anti-impact. ER-OS-05 can correct the angle deviation caused by mechanical installation through the supporting upper computer software.

If you have any thoughts about Sensor, please leave your comment and share it with your friends. If you are interested in Sensor products, you can leave me a message or send an email to ericco182@ericcointernational.com.

contact us:

WeChat: 13992884879

WhatsApp: 13630231561

ER-OS-05 Economical Directional Sensor

 ER-OS-05 Economical Directional Sensor includes a 3-axis flux-gate sensor and a 3-axis MEMS acceleration sensor. The sensor is equipped with built-in temperature compensation, and the inclination accuracy is ±0.1° and azimuth accuracy is ±0.5° within the temperature range of 0~125°c.https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/economical-directional-sensor.html

In addition, the sensor can also measure the total acceleration, total magnetic field strength, magnetic tool surface angle, geomagnetic inclination angle, temperature, rotation speed and other parameters. ER-OS-05 has the characteristics of small size, high precision, anti-vibration and anti-impact. ER-OS-05 can correct the angle deviation caused by mechanical installation through the supporting upper computer software.

If you have any thoughts about Sensor, please leave your comment and share it with your friends. If you are interested in Sensor products, you can leave me a message or send an email to ericco182@ericcointernational.com.

contact us:

WeChat: 13992884879

WhatsApp: 13630231561

https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/economical-directional-sensor.html

ER-OS-07 High Precision Directional Sensor

 The ER-OS-07 High Precision Directional Sensor is designed to enable high accuracy measurement of the tool face (roll), inclination and azimuth orientation angles in borehole logging and drilling applications.https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/high-quality-directional-sensor.html

The product consists of a 3-axis flux-gate magnetometer and a 3-axis accelerometer. It is powered by a wide DC voltage of 10V~36V and is digitally transmitted through a UART asynchronous transmitter. ER-OS-07 has a temperature compensation function, which can make the system reach the accuracy of ±0.1°, tool face ±0.1° and azimuth angle ±0.3°.

The maximum transmission rate of the magnetometer and accelerometer output is 6 times per second, and the direction angle is 4 times per second. ER-OS-07 communicates with the outside world through the UART interface. The operator can change the baud rate by setting the data bit in E2 PROM.

You can choose between two communication protocols according to specific requirements:

(1) Binary system: In this system, the user needs to send a data request and ER-OS-07 responds with multiple data packets.

(2) ASCII: The ASCII protocol obtains data by sending ASCII characters to ER-OS-07. The data returned by ER-OS-07 is transmitted in ASCII data stream, so it can be easily displayed on the video terminal.

Features https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/high-quality-directional-sensor.html

Temperature: 0~150℃

Accurate measurement under strong vibration environment with 16g peak value (20Hz~100Hz)

Shock resistance 1000g, vibration resistance 20grms

Digital data transmission

With minimum size of Φ31mm×384mm (customized to different needs)

Applications

Directional drilling, geological steering

MWD/LWD

If you have any thoughts about Sensor, please leave your comment and share it with your friends. If you are interested in Sensor products, you can leave me a message or send an email to ericco182@ericcointernational.com.

contact us:

WeChat: 13992884879

WhatsApp: 13630231561

https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/high-quality-directional-sensor.html

 ER-OS-05 Economical Directional Sensorhttps://www.ericcointernational.com/drilling-and-logging-system/mwd-components/economical-directional-sensor.html

Introduction

ER-OS-05 Economical Directional Sensor includes a 3-axis flux-gate sensor and a 3-axis MEMS acceleration sensor. The sensor is equipped with built-in temperature compensation, and the inclination accuracy is ±0.1° and azimuth accuracy is ±0.5° within the temperature range of 0~125°c.

In addition, the sensor can also measure the total acceleration, total magnetic field strength, magnetic tool surface angle, geomagnetic inclination angle, temperature, rotation speed and other parameters. ER-OS-05 has the characteristics of small size, high precision, anti-vibration and anti-impact. ER-OS-05 can correct the angle deviation caused by mechanical installation through the supporting upper computer software.

Featureshttps://www.ericcointernational.com/drilling-and-logging-system/mwd-components/economical-directional-sensor.html

Small size

High precision

Anti-vibration

Anti-impact

Specifications

Specifications

Inclination Range	0°~180°
Inclination Accuracy	±0.1°
Tool Face Range	0°~360°
Tool Face Accuracy	±0.2°
Azimuth Range	0°~360°
Azimuth	±0.5°@90°
	±1°@10°
	±2°@5°
Speed Range	0~400RPM
Speed Accuracy	±4%
Operation Temp	0℃~125℃
Storage Temp	-40℃~130℃
Input voltage scope	+4.9~+12V
Input current	≤50mA (Vin=+5V)
Baud rate	9600 (default) maximum to115200
Communication Interface	TTL/RS232
Shock	2000G, 0.5MS
Vibration	30g

 

If you have any thoughts about Sensor, please leave your comment and share it with your friends. If you are interested in Sensor products, you can leave me a message or send an email to ericco182@ericcointernational.com.

contact us:

WeChat: 13992884879

WhatsApp: 13630231561