The ER-OS-07 High Precision Directional Sensor is designed to enable high accuracy measurement of the tool face (roll), inclination and azimuth orientation angles in borehole logging and drilling applications.https://www.ericcointernational.com/drilling-and-logging-system/mwd-components/high-quality-directional-sensor.html
The product consists of a 3-axis flux-gate magnetometer and a 3-axis accelerometer. It is powered by a wide DC voltage of 10V~36V and is digitally transmitted through a UART asynchronous transmitter. ER-OS-07 has a temperature compensation function, which can make the system reach the accuracy of ±0.1°, tool face ±0.1° and azimuth angle ±0.3°.
The maximum transmission rate of the magnetometer and accelerometer output is 6 times per second, and the direction angle is 4 times per second. ER-OS-07 communicates with the outside world through the UART interface. The operator can change the baud rate by setting the data bit in E2 PROM.
You can choose between two communication protocols according to specific requirements:
(1) Binary system: In this system, the user needs to send a data request and ER-OS-07 responds with multiple data packets.
(2) ASCII: The ASCII protocol obtains data by sending ASCII characters to ER-OS-07. The data returned by ER-OS-07 is transmitted in ASCII data stream, so it can be easily displayed on the video terminal.
Temperature: 0~150℃
Accurate measurement under strong vibration environment with 16g peak value (20Hz~100Hz)
Shock resistance 1000g, vibration resistance 20grms
Digital data transmission
With minimum size of Φ31mm×384mm (customized to different needs)
Applications
Directional drilling, geological steering
MWD/LWD
If you have any thoughts about
Sensor, please leave your comment and share it with your friends. If you are interested
in Sensor products, you can leave me a message or send an email to
ericco182@ericcointernational.com.
contact us:
WeChat: 13992884879
WhatsApp: 13630231561
No comments:
Post a Comment