Oil and coal are important basic energy sources. With the rapid development of science and technology, MEMS IMU is increasingly widely used in the fields of oil and mining, injecting new vitality into this traditional industry. Oil and mining are complex and arduous tasks, facing many challenges. Most of these resources are distributed in areas with complex geological conditions. As resources are gradually depleted, the difficulty of exploration and mining continues to increase, which puts higher requirements on exploration and mining equipment.
In response to these problems, ERICCO has developed a new MEMS IMU ER-MIMU-09 specifically for the oil and mining field, which is mainly used in gyroscope tools and directional drilling tools. There are four versions in this series (ER-MIMU-09A, ER-MIMU-09B, ER-MIMU-09C, ER-MIMU-09H), with different accuracy and working temperature, which can be selected according to needs.
New appearance, small size
This IMU is designed for drilling rigs. It adopts a cylindrical shape with a diameter of only 30mm. It can be easily used in the probe tube, meeting the needs of users with higher requirements for tool tube diameters and providing convenience for limited working spaces.
High precision, high performance
Equipped with high-performance three-axis MEMS gyroscope and three-axis accelerometer, the small size does not compromise performance. The built-in gyroscope bias instability is 0.01-0.02deg/hr, and the angular velocity random walk is 0.0025-0.025°/√h. The accelerometer bias stability is ≤0.05mg, and the bias repeatability is ≤0.1mg. It can accurately output angular rate and acceleration information to help drilling engineers accurately control the trajectory of the drill bit and improve operating efficiency.
Strong environmental adaptability
This IMU adopts MEMS technology. In addition to low power consumption, it has good shock and vibration resistance and is not affected by magnetic fields. Considering the special operating environment in the field of oil mining, general IMUs cannot accurately output information in high temperature environments. We divide this IMU into normal temperature version (ER-MIMU-09A, ER-MIMU-09B, ER-MIMU-09C) and high temperature version (ER-MIMU-09H). The normal temperature version has an operating temperature of -40℃~ +80℃, and the high temperature version has an operating temperature of -40℃~ +125℃. It can work continuously in high temperature and harsh environments.
If you are also looking for a tool that can improve your work efficiency, then why not try our MEMS IMU! For data sheets, pricing and other information, please email me and I will respond immediately.
Email: ericco188@ericcointernational.com
WeChat: 18992836912
If you are interested in these areas, please follow me and I will continue to update.
You can also tell me your email address and we will send you the specifications.
#drilling #mining #coal #oil #gas #rig
No comments:
Post a Comment